Stainless Steel Rolltop Tambour Option

Choose HSA's new Stainless Steel Rolltop option for rugged security and cutting-edge aesthetics! This option replaces our wood rolltops tambours in a desk with their heavy duty stainless steel counterparts. Great for special applications and environments! Call for details!

An optional removable finished lower rear panel for our Rolltop desks. The Modesty Panel covers the normally open, lower rear portion of our desks to help hide open rolltop tambours, undermounted racks, wiring, operator's chair, etc. Secured with truss head machine screws for easy removal, it's shown installed on left and removed on right photo. (Pricing is for Modesty Panel ordered and shipped with desk. Note that Modesty Panels are already included with all Inspire Series Desks).

Cut-Away on Mirrored Desk Walls
( PASSTHRU)

This option reshapes the joined (bolted together) sidewalls of adjacent desks with a "cut-away" to create an easier "passthrough" for chairs and legs passing between the desks. Great for multiple operators or a single operator handling the controls for two desks.

These options provide four inches (4") of additional height from the tabletop upward on standard design desks. Allows extra rolltop clearance (or Upper Rack Bay clearance on High Rise version desks) for mixing consoles with larger meter bridges and video monitors (often ordered along with our VIDEOBAY option for extra clearance). Photo shows 2 Extended Rolltops (EXTRT's) with the PLUS4 option on the left desk. PLUS4 applies to low-profile desks, HRPLUS4 applies to High Rise version desks and INPLUS4 applies to the Inspire Series desks (where the sideracks also 'grow' taller to match the desk body). Be sure to always double check your actual equipment measurements for needed clearances. Also available in new "PLUS5" versions for 5" of additional height (not pictured). Click here for more dimensions.

Adjustable Video Recess Bay Option
(VIDEOBAY)

An adjustable drop down platform to provide a recessed area for Video Display Monitors. Can be an area at the rear side of a desks table (left photo) or across the entire rear of the table (right photo). The 7.25" wide shelf is adjustable from 0" to 9" down. Takes only 5.25" from the rear of the table dimension and still leaves 1.25" of clearance between the shelf and the back where the rolltop tambour retracts. Often ordered along with the PLUS4, HRPLUS4, INPLUS4 and NOUPPER option for even more clearance. (Monitors and Monitor Support Arms not included. Desks shown here also have the PLUS4 option).

Articulating, Flat-Panel Monitor Support Option
(MONARM)

This high-quality, articulating LCD video monitor support is great for allowing freedom of movement and view for the operator. Adjustable tension to allow monitor "float" for easy, balanced positioning. Several mounting options. Also see view of MONARM in left hand photo above with VIDEOBAY option (Desk shown here with PLUS4 option).

Photo at far left shows a High Rise Standard (HRSTD) on its RollBase with standard duty casters (RBSTD). Right photo shows a modified Inspire Rolltop Custom on its RollBase with heavy-duty casters. With this arrangement, the side-racks are bolted to the desk body for rigidity and the 2 RollBase platforms support both the racks and the desk sidewalls.

Turret Style Dual Angled Rack Insert-

3 versions of our new Turret Style Rack Insert are available for our High Rise Extended, Rolltop Custom and Rolltop Custom Quad based designs. This is a great way to mount rackmountable mixers, switchers, controllers, processors and displays! Available as either 9RU upper by 8RU lower rack spaces, 6RU by 10RU or 5RU by 12RU angled configurations in place of the desks full Upper GlideOut rack bays. Can be ordered with an appropriate sized Alternate Upper Rack Bay as shown in the right image. Order as either right-handed or left handed (right-handed versions shown above and cannot be ordered with an undermounted rack on same side).

Alternate Upper Rack Bays -

Available in 3 standard versions in place of the normal GlideOut Upper Rack Bays in our High Rise Standard, High Rise Extended, Rolltop Custom and Rolltop Custom Quad-based desks. This is a great way to have some additional eye-level rack space while opening up the table top clearance for video displays or taller mix consoles. Available in 1x3RU, 2x3RU and 3x3RU models (3x3RU will not fit desks smaller than the Rolltop Custom). These rack bays are supported from the table top and are shipped as field installable either for right or left-handed use (shown installed left-handed in leftmost photo and right-handed in center and right photo).

The optional accessway provides a cutout or multiple cutouts (depending on desk model) in the structural upper rear panel of the desk. Shown closed in the left photo, the Rear Accessway Option is completely covered with a finished panel matching the desk and secured with truss head philips screws for easy removal. Shown open in the right photo, this option provides easier access to the back connector fields of mixing consoles and the Upper Rack Bays of the High Rise style desks. Especially beneficial for larger, heavier, more tightly wired consoles and systems.

Installed within the normal, tambour-doored undermounted style rack, providing a 9 space, pullout equipment rack, which faces inward and upward to operator. GLIDEL installed on left handed racks, GLIDER on right handed. GLIDER shown in photo. Price includes one of our full Modesty Panels installed for the desk. (option must be ordered with desk).

Dust Covers & Padded Covers Option
( COVER)

Protect your HSA furniture and equipment with these high-quality custom fitted covers for each model of desk, rack and podium. Available in non-padded and protective padding versions and in several colors. A hook and loop seem makes covering and uncovering easy, even for one person handling a large desk!

"Rack on Left" Option
(RACKLEFT)

Desks with single undermounted equipment racks are normally shipped with that rack built on the operator's right-hand side. Desks can be ordered with the rack on the left side as shown here.

"Rack Center" Option
(RACKCTR)

Larger desks such as the Rolltop Custom Quad (pictured at left with an optional Modesty Panel as well) can be customized for a single, undermounted 10RU rack bay in the center of the desk, creating extra legroom for two seated operators.

Rear Door Panel Options for Racks
RVENT and DUALFAN

The locking rear door on our Classic, RollRacks, PR's, DR's &TR's can be modified with ventilation slots (RVENT option shown in left image) or with a temperature-sensed twin cooling fan system (DUALFAN option shown in right image). The standard door for all racks is shown in the center image.

Classic Rack DOOR option

The Classic Rack series is available with an optional flat-panel door featuring special 270 degree opening "swing-back" adjustable hinges allowing the door to fully open and lay flat against the side of the rack. Center image shows door in fully opened position. Includes our standard door lock.

Folding Side Shelf Option
(FOLDDWNR for operator's right side or FOLDDWNL for left)

Folding side shelf available for Classic Racks, RollRacks, PR's, DR's and TR's. Provides a convenient, easy to lift, lock and release side shelf/worksurface supported by a pair of heavy-duty folding steel supports.(available on other products with some modification).

Satin Silver Hardware Option
(HDWESILV)

By popular request, we are now offering a "satin silver" finish color hardware option for all products. This replaces our polished brass handles, locksets, nameplate and the truss head screws used for modesty panels and accessways. Looks particularly good on Natural Maple and Ebony finished desks!